4009-22-0574 
夾管閥可以對中，低粘度液體進行連續或者滴狀準確點膠。點膠的關閉和啟動可由氣動自動控制。通過旋鈕擠壓管路可以提交點膠的流量和液體的大小，閥的氣動時間可以設定。液體只和一次性管路接觸。應用液體為油劑，粘合劑，絕氧膠。
特點:
?一次性夾管更換方便
?為低粘度流體設計
? 體積小重量輕，操作簡便
規格:
| 料號: |
FU-1212 夾管微型點膠閥 |
|||
| 尺寸: | 83mm L x 40mm Diameter | |||
| 重量: | 82 g | |||
| 接觸液體: |
Polyethylene 聚乙烯 |
|||
| 粘度范圍: | 1 - 45,000 CPS | |||
| 最小點膠量: | 0.007 cc/ ml | |||
| 流速: | 0.54 GPM @ 60 psi (water) | |||
| 最大流體壓力: | 60 psi ( 4 Bar) | |||
| 進料口: | 陰螺紋 | |||
| 出料口: | 陽螺紋 | |||
| 安裝尺寸: | 1/4" 20UNC-2B | |||
| 啟動壓力: | 50 psi (3.4 Bar) Minimum | |||
可選配件:
| No. | Part Number | Description | |||||
| 1 | 1212-015MS | Production master stand | |||||
| 2 | 1212-014RC | Rod clamp | |||||
| 3 | 1212-013RM | Mounting rod | |||||
夾管
| Part Number | Fitting | I.D. INCH(mm) | Material | ||||
| 1212-0070-MF | Male/ Female | 0.07 (1.78) | LDPE Natural | ||||
| 1212-0100-MF | Male/ Female | 0.100 (2.54) | LDPE Natural |
| 料號: |
FU-1212 夾管微型點膠閥 |
|||
| 尺寸: | 83mm L x 40mm Diameter | |||
| 重量: | 82 g | |||
| 接觸液體: | 聚乙烯 | |||
| 粘度范圍: | 1 - 45,000 CPS | |||
| 最小點膠量: | 0.007 cc/ ml | |||
| 流速: | 0.54 GPM @ 60 psi (water) | |||
| 最大流體壓力: | 60 psi ( 4 Bar) | |||
| 進料口: | 陰螺紋 | |||
| 出料口: | 陽螺紋 | |||
| 安裝尺寸: | 1/4" 20UNC-2B | |||
| 啟動壓力: | 50 psi (3.4 Bar) Minimum | |||
